Windows 7 64bit with new UVerse Pace Plc 5031NV-030 router/modem. Just got this from the technician to replace a b/g router/modem. When trying to access router at 192.168.1.254, it takes an awful long time (30 seconds to a minute) and sometimes never connects (spinning logo). This happens occasionally. Also, same result when trying to access web pages occasionally.
When the router was first hooked up, it reboot a couple of times on its own. The technician said the first time was probably firmware update, but said it was unusual for it to happen a second or third time. Speeds are otherwise really good.
Is there anything I can check to see why there's connection to website issues occasionally?
Ping results:
Pinging localhost 30 times with: 64 bytes of data
ping successful: icmp seq:0, time=1 ms
ping successful: icmp seq:1, time=0 ms
ping successful: icmp seq:2, time=0 ms
ping successful: icmp seq:3, time=1 ms
ping successful: icmp seq:4, time=0 ms
ping successful: icmp seq:5, time=0 ms
ping successful: icmp seq:6, time=0 ms
ping successful: icmp seq:7, time=0 ms
ping successful: icmp seq:8, time=0 ms
ping successful: icmp seq:9, time=0 ms
ping successful: icmp seq:10, time=0 ms
ping successful: icmp seq:11, time=0 ms
ping successful: icmp seq:12, time=0 ms
ping successful: icmp seq:13, time=0 ms
ping successful: icmp seq:14, time=0 ms
ping successful: icmp seq:15, time=0 ms
ping successful: icmp seq:16, time=0 ms
ping successful: icmp seq:17, time=1 ms
ping successful: icmp seq:18, time=0 ms
ping successful: icmp seq:19, time=1 ms
ping successful: icmp seq:20, time=0 ms
ping successful: icmp seq:21, time=1 ms
ping successful: icmp seq:22, time=0 ms
ping successful: icmp seq:23, time=1 ms
ping successful: icmp seq:24, time=0 ms
ping successful: icmp seq:25, time=1 ms
ping successful: icmp seq:26, time=0 ms
ping successful: icmp seq:27, time=1 ms
ping successful: icmp seq:28, time=0 ms
ping successful: icmp seq:29, time=1 ms
traceroute localhost with: 64 bytes of data
1: 127.0.0.1(localhost), time=2 ms
↧