I was just recently put on a N Card with 17a at 3014 ft so I figured I would show some numbers for people. Sadly I am still producing FECs like crazy still better then what it was before when I was on a F Card I was producing 1,000,000 FECs every 15 mins start. I originally had an order for Bonded Pair but the person that created the ticket didn't even give an assignment so the tech put me on a single pair only.
So I am kind of lost on what to try next without giving the tech a repeat for a repair order. I guess I can try and put in another order for Bonded pair as that would count as an install and not a repair. But I am still waiting for the tech to get back to me to see if his manager will let him come back over and do that for me.
DSL Status
Line State Up
Downstream Sync Rate (kbps) 25215
Upstream Sync Rate (kbps) 2048
Downstream Max Attainable Rate (kbps) 41464
Upstream Max Attainable Rate (kbps) 14274
Modulation VDSL2
Data Path Interleaved
Downstream Upstream
SN Margin (dB) 15.4 28.3
Line Attenuation (dB) 48.2 35.6
Output Power(dBm) 14.5 7.0
Errored Seconds 0 0
Loss of Signal 0 0
Loss of Frame 0 0
FEC Errors 267115 0
CRC Errors 0 0
Previous speeds when I was on the F Card was
Line State Up
Downstream Sync Rate (kbps) 32224
Upstream Sync Rate (kbps) 4700
Downstream Max Attainable Rate (kbps) 34254
Upstream Max Attainable Rate (kbps) 4700
As for all the FECs when I was on the F card I figured it was due to the fact that I was on the 32/5 profile when I should have been on the 25/2 profile.
↧