I recently had Uverse TV installed and have 3 Cisco receivers. 1 x 7500 dvr and 2x 7000 non-dvr. I also have Uverse voip and internet. The rg is the 3812V for bonded pairs. All receivers are fed by direct run Ethernet cat6 cables under 60 feet. No wireless.
My max line rate is 51000, and no line errors. Line is very clean. The attenuation is 19 down/15 up, and the noise margin is 29 down/31 up. Upstream power is 5.8 dbm.
The 7500 dvr locks up every few hours with remote activity. If I turn on a channel and do not use the remote, it has never locked up even after a full day (left on over night). It seems to occur when I am performing a large amount of remote control functions like guide browsing, or setting up favorites, etc.
It will only restart by removing the power cable. Holding in the power button will not restart it. The power button light remains lit even when it locks up. At that point it will not respond until the power cord is removed and re-inserted.
Anyone have any experience with this.
Thanks
Switcher
↧