I recently purchased a Zyxel USG 20W firewall/router/wireless access to replace my smoothwall 3.1 pc. my concern is how do i setup the Zyxel to act as the filter like the smoothwall did. what is the physical setup. i dont want to use the zyxel as WAN router the ATT gateway takes care of that. I just want the zyxel to provide wireless access to devices and it will be connected to a cisco switch for wired devices such as desktop pc etc. should i connect the incoming traffic ethernet cable to port 2 on the zyxel from the att router that should be correct. then on port 3 i connect the cisco switch? i just want to make sure my logic is correct. the zyxel setup should be the same as the smoothie. thanks
↧