I am new customer in former bellsouth area who just got Power 45+Voice an hour ago; FTTN K card, probably around 2100 feet (non-pedestal/buried drop cable from street around 40 feet away is from around 1987 two pair blue/blue-white and orange/orange-white which I assume means twisted) plus around 75 feet Cat5e after the NID. Internet seems okay (profile allows speed tests >40/5.5) though I'll be paying close attention first 30 days such as watching that FEC doesn't exceed 6000/hr. Stats are below, though they are after I reset the device - before reset the Line 1 Down SN was 9.1 and the Line 2 Max Attainable was higher (I reset because Line 1 Down SN seemed barely above minimum 9 for which installer said he measured 11). I am surprised that Line 2 Downstream Rate is higher than Max Attainable.
Anything I should watch out for? Should I be resetting sometimes and logging how rate/SN changes?
DSL Status
Line 1 Line 2
Line State Up Up
Downstream Sync Rate (kbps) 28472 26751
Upstream Sync Rate (kbps) 3040 3040
Downstream Max Attainable Rate (kbps) 38620 24908
Upstream Max Attainable Rate (kbps) 8767 9426
Modulation VDSL2 VDSL2
Data Path Interleaved Interleaved
Downstream Upstream Downstream Upstream
SN Margin (dB) 11.5 17.1 12.0 17.9
Line Attenuation (dB) 20.7 14.4 20.9 13.6
Output Power(dBm) 14.5 -7.1 14.5 -7.7
Errored Seconds 0 0 0 0
Loss of Signal 0 0 0 0
Loss of Frame 0 0 0 0
FEC Errors 3140 0 0 0
CRC Errors 0 0 0 0
Aggregated Information
Bonded Downstream Rate 55223
Bonded Upstream Rate 6080
↧